| Customization: | Available |
|---|---|
| Accuracy: | >±1% |
| Main Application: | Nature Gas, Gas |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Fluid | gas without water molecules (except acetylene) |
| Velocity range | 0~60m/s |
| Accuracy | Reading±1%,full range±0.5% |
| Repeatability | full range0.2% |
| Temperature | Environmental conditions:-20ºC~70ºC;Medium temperature:-20ºC~120ºC or -20ºC~350ºC |
| Power | 24VDC/220VAC |
| Output | 4~20mA,pulse |
| Response time | ≤1s |
| temperature coefficient | 0.05%/ºC |
| Communication interface | serial port output RS485,HART |
| Screen content | quantity of heat,flow for short period;total flow |
| Pressure | ≤4.2MPa |
| connection | locking device/ball valve, flanged joint,Flange mounting |
| Explosion proof grade | Exd II CT4 |
| Ingress protection | Sensor IP67;transmitter IP65 |
| Alarm point | Relay dry contact output, can choose the upper limit single alarm or lower limit double alarm |
| Sensor diameter | 3mm/4mm/5mm |
| Probe diameter | 18mm |
| Sensor texture | 1Cr18Ni9Ti;304L;hastelloy C;Ta |
| Probe texture | 1Cr18Ni9Ti;304L;hastelloy C;Ta |
| Shell texture | Dangerous areas to install shell for powder coated aluminum castings |
| Electrical interface | M20X1.5 |
| Pressure loss | Pipe diameter greater than DN80 can be ignored |
| KTGMFM | THERMAL GAS MASS FLOWMETER | |||||||||
| Structural form | F | Segment | ||||||||
| I | One body | |||||||||
| PI | Plug-in | |||||||||
| PL | Pipe type | |||||||||
| Connection mode | C | Franka | ||||||||
| ST | Screw thread | |||||||||
| F | Flange connection | |||||||||
| W | Welding base | |||||||||
| B | Base+Ball Value | |||||||||
| Probe material | G | 316 | ||||||||
| F | Polyvinyl chloride coating | |||||||||
| Public name path(unit:mm) | 15 | 15 | ||||||||
| 20 | 25 | |||||||||
| ... | ... | |||||||||
| A10 | DN1000 | |||||||||
| Use environment | A0 | Normal | ||||||||
| A1 | Explosion-proof | |||||||||
| Temperature | T0 | -20~60ºC | ||||||||
| T1 | 60~100ºC | |||||||||
| T2 | 100~150ºC | |||||||||
| T3 | 150~200ºC | |||||||||
| T4 | 200~300ºC | |||||||||
| Pressure | P0 | Negative pressure | ||||||||
| P1 | 0~1.0MPa | |||||||||
| P2 | 0~1.6MPa | |||||||||
| P3 | 0~2.0MPa | |||||||||
| P4 | 0~3.0MPa | |||||||||
| Power supply | D | 24VDC | ||||||||
| A | 220VAC | |||||||||
| O | Other | |||||||||
| Display | N | No Display | ||||||||
| E | LED | |||||||||
| C | LCD | |||||||||
| EXAMPLES OF SELECTION:KT GMFMIF 615 A0T1P1DE-HOT GAS MASS FLOWMETER,TUBE DIAMETER DN15,A TYPE FLANGE CONNECTION STRUCTURE,PROBE MATERIAL IS 316 STAINLESS STEEL,NO EXPLOSION,TEMPERATURE 60-100ºC,PRESSURE 1.0 MPA,POWER SUPPLY 24VDC,LED DISPLAY. REMARKS:THERMAL GAS MASS FLOW METER SELECTION TYPE IS LONGER,SIMPLE MODEL:KT GMFM-CALIBER |
||||||||||
Related Products:Certification:
){kind=link}